[GuadaWireless] Re: Guada46-Pruebas

Alberto Fernández albertofburgos en ya.com
Sab Oct 21 20:37:05 CEST 2006 

Hola, retomo el tema de ruteos, al menos para que mis clientes puedan 
acceder a guadawireless.

El NAT para dar acceso a internet, ya lo haré mas tarde....

Pego la configuración del ruteo que tengo ahora en el router matriz (adsl):

*Device Info -- Route*

Flags: U - up, ! - reject, G - gateway, H - host, R - reinstate
D - dynamic (redirect), M - modified (redirect).

Destination 	Gateway 	Subnet Mask 	Flag 	Metric 	Interface
192.168.153.1 	0.0.0.0 	255.255.255.255 	UH 	0 	ppp33
10.34.211.160 	0.0.0.0 	255.255.255.224 	U 	0 	br0
192.168.1.0 	0.0.0.0 	255.255.255.0 	U 	0 	br0
172.16.0.0 	10.34.211.161 	255.255.0.0 	UG 	1 	br0
10.0.0.0 	10.34.211.161 	255.0.0.0 	UG 	1 	br0
0.0.0.0 	192.168.153.1 	0.0.0.0 	UG 	0 	ppp33


Supongo que me he equivocado al poner las mascaras de red, pero aun no 
domino lo de /8 y /16....

Por otra parte, creo que tengo activado el DHCP en el wrt, pero no se si 
está configurado ni como hacerlo. Os prometo que he intentado pedir 
ayuda a San Google, pero no encuentro nada para torpes....

Os copio aqui la configuración de DHCP


    DHCP Interfaces


      *Interfaces*

Nombre 	Interface 	Interfaces 	Action
------------------------------------------------------------------------
lan 	vlan0 	vlan0 eth2 	Modify 
<network-dhcpiface.sh?action=modify&iface=lan>
wan 	vlan1 	
	Modify <network-dhcpiface.sh?action=modify&iface=wan>
wifi 	br1 	eth1 	Modify <network-dhcpiface.sh?action=modify&iface=wifi>


          *Short help:*

 


      *Options For lan*

Parameters 	Value 	Action
------------------------------------------------------------------------
		


          *Short help:*

 


      *DHCP Server for lan*

iface
	
DHCP Enabled 	
DHCP Start 	10.34.211.160
DHCP Num 	
DHCP Bail 	


          *Short help:*

 
------------------------------------------------------------------------

Os pego también la NVRAM del WRT:


    NVRAM


      General System Settings


Warning: Changing these settings may result in permenant damage to your 
router.


        Changes will not take effect until you choose "Apply Changes"


Setting Variable 	Current Value
	/New Variable/ 	
aa0 	|3| 	Change <system-nvram.sh?action=Change&var=aa0> 	Delete 
<system-nvram.sh?action=Delete&var=aa0>
ag0 	|0x02| 	Change <system-nvram.sh?action=Change&var=ag0> 	Delete 
<system-nvram.sh?action=Delete&var=ag0>
boardflags 	|0x2558| 	Change 
<system-nvram.sh?action=Change&var=boardflags> 	Delete 
<system-nvram.sh?action=Delete&var=boardflags>
boardflags2 	|0| 	Change 
<system-nvram.sh?action=Change&var=boardflags2> 	Delete 
<system-nvram.sh?action=Delete&var=boardflags2>
boardnum 	|42| 	Change <system-nvram.sh?action=Change&var=boardnum> 
Delete <system-nvram.sh?action=Delete&var=boardnum>
boardrev 	|0x10| 	Change <system-nvram.sh?action=Change&var=boardrev> 
Delete <system-nvram.sh?action=Delete&var=boardrev>
boardtype 	|0x0467| 	Change 
<system-nvram.sh?action=Change&var=boardtype> 	Delete 
<system-nvram.sh?action=Delete&var=boardtype>
boot_ver 	|v3.7| 	Change <system-nvram.sh?action=Change&var=boot_ver> 
Delete <system-nvram.sh?action=Delete&var=boot_ver>
boot_wait 	|on| 	Change <system-nvram.sh?action=Change&var=boot_wait> 
Delete <system-nvram.sh?action=Delete&var=boot_wait>
bootnv_ver 	|4| 	Change <system-nvram.sh?action=Change&var=bootnv_ver> 
Delete <system-nvram.sh?action=Delete&var=bootnv_ver>
ccode 	|0| 	Change <system-nvram.sh?action=Change&var=ccode> 	Delete 
<system-nvram.sh?action=Delete&var=ccode>
cctl 	|0| 	Change <system-nvram.sh?action=Change&var=cctl> 	Delete 
<system-nvram.sh?action=Delete&var=cctl>
clkfreq 	|200| 	Change <system-nvram.sh?action=Change&var=clkfreq> 
Delete <system-nvram.sh?action=Delete&var=clkfreq>
device_name 	|Linksys WRT54G| 	Change 
<system-nvram.sh?action=Change&var=device_name> 	Delete 
<system-nvram.sh?action=Delete&var=device_name>
dl_ram_addr 	|a0001000| 	Change 
<system-nvram.sh?action=Change&var=dl_ram_addr> 	Delete 
<system-nvram.sh?action=Delete&var=dl_ram_addr>
eou_device_id 	|EO4TEKDZ| 	Change 
<system-nvram.sh?action=Change&var=eou_device_id> 	Delete 
<system-nvram.sh?action=Delete&var=eou_device_id>
et0macaddr 	|00:16:B6:D9:25:BD| 	Change 
<system-nvram.sh?action=Change&var=et0macaddr> 	Delete 
<system-nvram.sh?action=Delete&var=et0macaddr>
et0mdcport 	|0| 	Change <system-nvram.sh?action=Change&var=et0mdcport> 
Delete <system-nvram.sh?action=Delete&var=et0mdcport>
et0phyaddr 	|30| 	Change 
<system-nvram.sh?action=Change&var=et0phyaddr> 	Delete 
<system-nvram.sh?action=Delete&var=et0phyaddr>
firmware_name 	|OpenWrt White Russian| 	Change 
<system-nvram.sh?action=Change&var=firmware_name> 	Delete 
<system-nvram.sh?action=Delete&var=firmware_name>
firmware_subtitle 	|With X-Wrt Extensions| 	Change 
<system-nvram.sh?action=Change&var=firmware_subtitle> 	Delete 
<system-nvram.sh?action=Delete&var=firmware_subtitle>
firmware_version 	|RC5| 	Change 
<system-nvram.sh?action=Change&var=firmware_version> 	Delete 
<system-nvram.sh?action=Delete&var=firmware_version>
il0macaddr 	|00:16:b6:d9:25:bf| 	Change 
<system-nvram.sh?action=Change&var=il0macaddr> 	Delete 
<system-nvram.sh?action=Delete&var=il0macaddr>
lan_dhcp_enabled 	|1| 	Change 
<system-nvram.sh?action=Change&var=lan_dhcp_enabled> 	Delete 
<system-nvram.sh?action=Delete&var=lan_dhcp_enabled>
lan_dns 	|192.168.1.1 10.34.16.1 10.34.210.152| 	Change 
<system-nvram.sh?action=Change&var=lan_dns> 	Delete 
<system-nvram.sh?action=Delete&var=lan_dns>
lan_gateway 	|192.168.1.1| 	Change 
<system-nvram.sh?action=Change&var=lan_gateway> 	Delete 
<system-nvram.sh?action=Delete&var=lan_gateway>
lan_ifname 	|vlan0| 	Change 
<system-nvram.sh?action=Change&var=lan_ifname> 	Delete 
<system-nvram.sh?action=Delete&var=lan_ifname>
lan_ifnames 	|vlan0 eth2| 	Change 
<system-nvram.sh?action=Change&var=lan_ifnames> 	Delete 
<system-nvram.sh?action=Delete&var=lan_ifnames>
lan_ipaddr 	|10.34.211.161| 	Change 
<system-nvram.sh?action=Change&var=lan_ipaddr> 	Delete 
<system-nvram.sh?action=Delete&var=lan_ipaddr>
lan_netmask 	|255.255.255.224| 	Change 
<system-nvram.sh?action=Change&var=lan_netmask> 	Delete 
<system-nvram.sh?action=Delete&var=lan_netmask>
lan_proto 	|static| 	Change 
<system-nvram.sh?action=Change&var=lan_proto> 	Delete 
<system-nvram.sh?action=Delete&var=lan_proto>
language 	|es| 	Change <system-nvram.sh?action=Change&var=language> 
Delete <system-nvram.sh?action=Delete&var=language>
ntp_server 	|pool.ntp.org| 	Change 
<system-nvram.sh?action=Change&var=ntp_server> 	Delete 
<system-nvram.sh?action=Delete&var=ntp_server>
openvpn_cli 	|0| 	Change 
<system-nvram.sh?action=Change&var=openvpn_cli> 	Delete 
<system-nvram.sh?action=Delete&var=openvpn_cli>
openvpn_cli_auth 	|psk| 	Change 
<system-nvram.sh?action=Change&var=openvpn_cli_auth> 	Delete 
<system-nvram.sh?action=Delete&var=openvpn_cli_auth>
openvpn_cli_port 	|1194| 	Change 
<system-nvram.sh?action=Change&var=openvpn_cli_port> 	Delete 
<system-nvram.sh?action=Delete&var=openvpn_cli_port>
openvpn_cli_proto 	|udp| 	Change 
<system-nvram.sh?action=Change&var=openvpn_cli_proto> 	Delete 
<system-nvram.sh?action=Delete&var=openvpn_cli_proto>
opo 	|0x02| 	Change <system-nvram.sh?action=Change&var=opo> 	Delete 
<system-nvram.sh?action=Delete&var=opo>
os_flash_addr 	|bfc40000| 	Change 
<system-nvram.sh?action=Change&var=os_flash_addr> 	Delete 
<system-nvram.sh?action=Delete&var=os_flash_addr>
os_ram_addr 	|80001000| 	Change 
<system-nvram.sh?action=Change&var=os_ram_addr> 	Delete 
<system-nvram.sh?action=Delete&var=os_ram_addr>
pa0b0 	|0x168b| 	Change <system-nvram.sh?action=Change&var=pa0b0> 
Delete <system-nvram.sh?action=Delete&var=pa0b0>
pa0b1 	|0xfabf| 	Change <system-nvram.sh?action=Change&var=pa0b1> 
Delete <system-nvram.sh?action=Delete&var=pa0b1>
pa0b2 	|0xfeaf| 	Change <system-nvram.sh?action=Change&var=pa0b2> 
Delete <system-nvram.sh?action=Delete&var=pa0b2>
pa0itssit 	|62| 	Change <system-nvram.sh?action=Change&var=pa0itssit> 
Delete <system-nvram.sh?action=Delete&var=pa0itssit>
pa0maxpwr 	|0x4e| 	Change 
<system-nvram.sh?action=Change&var=pa0maxpwr> 	Delete 
<system-nvram.sh?action=Delete&var=pa0maxpwr>
pmon_ver 	|CFE 3.91.37.0| 	Change 
<system-nvram.sh?action=Change&var=pmon_ver> 	Delete 
<system-nvram.sh?action=Delete&var=pmon_ver>
scratch 	|a0180000| 	Change 
<system-nvram.sh?action=Change&var=scratch> 	Delete 
<system-nvram.sh?action=Delete&var=scratch>
sromrev 	|2| 	Change <system-nvram.sh?action=Change&var=sromrev> 	Delete 
<system-nvram.sh?action=Delete&var=sromrev>
time_zone 	|CET-1CEST-2,M3.5.0/02:00:00,M10.5.0/03:00:00| 	Change 
<system-nvram.sh?action=Change&var=time_zone> 	Delete 
<system-nvram.sh?action=Delete&var=time_zone>
vlan0hwname 	|et0| 	Change 
<system-nvram.sh?action=Change&var=vlan0hwname> 	Delete 
<system-nvram.sh?action=Delete&var=vlan0hwname>
vlan0ports 	|3 2 1 0 5*| 	Change 
<system-nvram.sh?action=Change&var=vlan0ports> 	Delete 
<system-nvram.sh?action=Delete&var=vlan0ports>
vlan1hwname 	|et0| 	Change 
<system-nvram.sh?action=Change&var=vlan1hwname> 	Delete 
<system-nvram.sh?action=Delete&var=vlan1hwname>
vlan1ports 	|4 5| 	Change 
<system-nvram.sh?action=Change&var=vlan1ports> 	Delete 
<system-nvram.sh?action=Delete&var=vlan1ports>
wait_time 	|1| 	Change <system-nvram.sh?action=Change&var=wait_time> 
Delete <system-nvram.sh?action=Delete&var=wait_time>
wan_device 	|vlan1| 	Change 
<system-nvram.sh?action=Change&var=wan_device> 	Delete 
<system-nvram.sh?action=Delete&var=wan_device>
wan_dns 	|192.168.1.1| 	Change 
<system-nvram.sh?action=Change&var=wan_dns> 	Delete 
<system-nvram.sh?action=Delete&var=wan_dns>
wan_gateway 	|172.16.98.97| 	Change 
<system-nvram.sh?action=Change&var=wan_gateway> 	Delete 
<system-nvram.sh?action=Delete&var=wan_gateway>
wan_hostname 	|guada46| 	Change 
<system-nvram.sh?action=Change&var=wan_hostname> 	Delete 
<system-nvram.sh?action=Delete&var=wan_hostname>
wan_ifname 	|vlan1| 	Change 
<system-nvram.sh?action=Change&var=wan_ifname> 	Delete 
<system-nvram.sh?action=Delete&var=wan_ifname>
wan_ipaddr 	|10.34.211.162| 	Change 
<system-nvram.sh?action=Change&var=wan_ipaddr> 	Delete 
<system-nvram.sh?action=Delete&var=wan_ipaddr>
wan_netmask 	|255.255.255.224| 	Change 
<system-nvram.sh?action=Change&var=wan_netmask> 	Delete 
<system-nvram.sh?action=Delete&var=wan_netmask>
wan_proto 	|none| 	Change 
<system-nvram.sh?action=Change&var=wan_proto> 	Delete 
<system-nvram.sh?action=Delete&var=wan_proto>
watchdog 	|5000| 	Change <system-nvram.sh?action=Change&var=watchdog> 
Delete <system-nvram.sh?action=Delete&var=watchdog>
wifi_broadcast 	|172.16.98.127| 	Change 
<system-nvram.sh?action=Change&var=wifi_broadcast> 	Delete 
<system-nvram.sh?action=Delete&var=wifi_broadcast>
wifi_dns 	|10.34.156.1| 	Change 
<system-nvram.sh?action=Change&var=wifi_dns> 	Delete 
<system-nvram.sh?action=Delete&var=wifi_dns>
wifi_gateway 	|172.16.98.97| 	Change 
<system-nvram.sh?action=Change&var=wifi_gateway> 	Delete 
<system-nvram.sh?action=Delete&var=wifi_gateway>
wifi_ifname 	|br1| 	Change 
<system-nvram.sh?action=Change&var=wifi_ifname> 	Delete 
<system-nvram.sh?action=Delete&var=wifi_ifname>
wifi_ifnames 	|eth1| 	Change 
<system-nvram.sh?action=Change&var=wifi_ifnames> 	Delete 
<system-nvram.sh?action=Delete&var=wifi_ifnames>
wifi_ipaddr 	|172.16.98.111| 	Change 
<system-nvram.sh?action=Change&var=wifi_ipaddr> 	Delete 
<system-nvram.sh?action=Delete&var=wifi_ipaddr>
wifi_netmask 	|255.255.255.224| 	Change 
<system-nvram.sh?action=Change&var=wifi_netmask> 	Delete 
<system-nvram.sh?action=Delete&var=wifi_netmask>
wifi_proto 	|static| 	Change 
<system-nvram.sh?action=Change&var=wifi_proto> 	Delete 
<system-nvram.sh?action=Delete&var=wifi_proto>
wifi_stp 	|1| 	Change <system-nvram.sh?action=Change&var=wifi_stp> 
Delete <system-nvram.sh?action=Delete&var=wifi_stp>
wl0_akm 	|none| 	Change <system-nvram.sh?action=Change&var=wl0_akm> 
Delete <system-nvram.sh?action=Delete&var=wl0_akm>
wl0_antdiv 	|1| 	Change <system-nvram.sh?action=Change&var=wl0_antdiv> 
Delete <system-nvram.sh?action=Delete&var=wl0_antdiv>
wl0_ap_isolate 	|0| 	Change 
<system-nvram.sh?action=Change&var=wl0_ap_isolate> 	Delete 
<system-nvram.sh?action=Delete&var=wl0_ap_isolate>
wl0_bcn 	|100| 	Change <system-nvram.sh?action=Change&var=wl0_bcn> 
Delete <system-nvram.sh?action=Delete&var=wl0_bcn>
wl0_channel 	|0| 	Change 
<system-nvram.sh?action=Change&var=wl0_channel> 	Delete 
<system-nvram.sh?action=Delete&var=wl0_channel>
wl0_closed 	|0| 	Change <system-nvram.sh?action=Change&var=wl0_closed> 
Delete <system-nvram.sh?action=Delete&var=wl0_closed>
wl0_crypto 	|tkip| 	Change 
<system-nvram.sh?action=Change&var=wl0_crypto> 	Delete 
<system-nvram.sh?action=Delete&var=wl0_crypto>
wl0_distance 	|10700| 	Change 
<system-nvram.sh?action=Change&var=wl0_distance> 	Delete 
<system-nvram.sh?action=Delete&var=wl0_distance>
wl0_dtim 	|1| 	Change <system-nvram.sh?action=Change&var=wl0_dtim> 
Delete <system-nvram.sh?action=Delete&var=wl0_dtim>
wl0_frag 	|2346| 	Change <system-nvram.sh?action=Change&var=wl0_frag> 
Delete <system-nvram.sh?action=Delete&var=wl0_frag>
wl0_frameburst 	|1| 	Change 
<system-nvram.sh?action=Change&var=wl0_frameburst> 	Delete 
<system-nvram.sh?action=Delete&var=wl0_frameburst>
wl0_ifname 	|eth1| 	Change 
<system-nvram.sh?action=Change&var=wl0_ifname> 	Delete 
<system-nvram.sh?action=Delete&var=wl0_ifname>
wl0_infra 	|1| 	Change <system-nvram.sh?action=Change&var=wl0_infra> 
Delete <system-nvram.sh?action=Delete&var=wl0_infra>
wl0_lazywds 	|0| 	Change 
<system-nvram.sh?action=Change&var=wl0_lazywds> 	Delete 
<system-nvram.sh?action=Delete&var=wl0_lazywds>
wl0_macmode 	|disabled| 	Change 
<system-nvram.sh?action=Change&var=wl0_macmode> 	Delete 
<system-nvram.sh?action=Delete&var=wl0_macmode>
wl0_mode 	|sta| 	Change <system-nvram.sh?action=Change&var=wl0_mode> 
Delete <system-nvram.sh?action=Delete&var=wl0_mode>
wl0_plcphdr 	|long| 	Change 
<system-nvram.sh?action=Change&var=wl0_plcphdr> 	Delete 
<system-nvram.sh?action=Delete&var=wl0_plcphdr>
wl0_radio 	|1| 	Change <system-nvram.sh?action=Change&var=wl0_radio> 
Delete <system-nvram.sh?action=Delete&var=wl0_radio>
wl0_rts 	|256| 	Change <system-nvram.sh?action=Change&var=wl0_rts> 
Delete <system-nvram.sh?action=Delete&var=wl0_rts>
wl0_ssid 	|guada35-link| 	Change 
<system-nvram.sh?action=Change&var=wl0_ssid> 	Delete 
<system-nvram.sh?action=Delete&var=wl0_ssid>
wl0_txdiv 	|1| 	Change <system-nvram.sh?action=Change&var=wl0_txdiv> 
Delete <system-nvram.sh?action=Delete&var=wl0_txdiv>
wl0_txpwr 	|64| 	Change <system-nvram.sh?action=Change&var=wl0_txpwr> 
Delete <system-nvram.sh?action=Delete&var=wl0_txpwr>
wl0_wep 	|disabled| 	Change 
<system-nvram.sh?action=Change&var=wl0_wep> 	Delete 
<system-nvram.sh?action=Delete&var=wl0_wep>
wl0gpio2 	|0| 	Change <system-nvram.sh?action=Change&var=wl0gpio2> 
Delete <system-nvram.sh?action=Delete&var=wl0gpio2>
wl0gpio3 	|0| 	Change <system-nvram.sh?action=Change&var=wl0gpio3> 
Delete <system-nvram.sh?action=Delete&var=wl0gpio3>
wl0id 	|0x4320| 	Change <system-nvram.sh?action=Change&var=wl0id> 
Delete <system-nvram.sh?action=Delete&var=wl0id>

------------------------------------------------------------------------

Por último, os pego la configuración DHCP que tengo en el router ADSL:

*Local Area Network (LAN) Setup*

Configure the DSL Gateway IP Address and Subnet Mask for LAN interface.

IP Address: 	
Subnet Mask: 	


  Disable DHCP Server
  Enable DHCP Server
       Start IP Address: 	
       End IP Address: 	
       Leased Time (hour): 	

  Enable DHCP Server Relay
       DHCP Server IP Address:   	

 
Configure the second IP Address and Subnet Mask for LAN interface

IP Address: 	
Subnet Mask: 	



A ver si me dais alguna pista....

Iván Forcada Atienza escribió:
> Te falta añadirle rutas para 10.0.0.0/8 y 172.16.0.0/16 vayan a traves
> de la ip del rango 10.34.211.160 que esté conectada a guada35
> (seguramente la 10.34.211.161).
>
> Para que tus clientes lleguen a guadawireless, pues tienes que ponerles
> la ruta por defecto a la misma ip, pero esto debería hacerlo el dhcp,
> así que si eso peganos su config a ver si vemos algo.
>
> Si quieres que tus clientes o tus equipos de casa salgan a internet,
> tienes que hacer nat. Te digo lo mismo que a Sergio, te toca hacer los
> deberes ;-):
>
> http://es.wikipedia.org/wiki/Traducción_de_dirección_de_red
> http://www.cicei.ulpgc.es/gsi/tut_tcpip/3376nat.html
> http://bulma.net/body.phtml?nIdNoticia=1522
>
> [lun, 16 oct 2006 00:35:55 +0200] - Alberto Fernández:
>   
>> Buenas de nuevo.
>>
>> Esta tarde hemos sufrido un corte de luz, por lo que no he podido conectar de nuevo el nodo hasta que he llegado.
>>
>> Veo en el mapa que estoy en rojo, pero desde el nodo hago ping perfectamente a direcciones de la red. Otra cosa es desde el ordenador, que me dice red de 
>> destino inaccesible, por lo que supongo deberé configurar la tabla de enrutamiento.
>>
>> Os pongo como me sale ahora en el router adsl:
>>
>> *Device Info -- Route*
>>
>> Flags: U - up, ! - reject, G - gateway, H - host, R - reinstate
>> D - dynamic (redirect), M - modified (redirect).
>>
>> Destination 	Gateway 	Subnet Mask 	Flag 	Metric 	Interface
>> 192.168.153.1 	0.0.0.0 	255.255.255.255 	UH 	0 	ppp33
>> 10.34.211.160 	0.0.0.0 	255.255.255.224 	U 	1 	br0
>> 192.168.1.0 	0.0.0.0 	255.255.255.0 	U 	0 	br0
>> 0.0.0.0 	192.168.153.1 	0.0.0.0 	UG 	0 	ppp33
>>
>>
>> Otra cosa que me preocupa es configurar la parte de mi red que quiero que sea accesible, o cortarla del todo, no se como configurar un firewall...
>>
>> Por último, cuando pueda conectar, que recursos hay en la red? Como le sacais partido vosotros??
>>
>>
>> Saludos,
>>
>> Alberto
>>
>>
>>
>>     
>
>   

------------ próxima parte ------------
Se ha borrado un adjunto en formato HTML...
URL: http://guadawireless.net/pipermail/guadawireless/attachments/20061021/0a077d49/attachment-0001.html

Más información sobre la lista de distribución guadawireless